Program End - Beko DH 8533 GA0 Bedienungsanleitung

perating the product
O
C
If a new program is selected by
changing the position of the
program selection knob while
your machine is in stand-by
mode, the running program ends.
Do not contact the inner surface
of the drum when adding or
removing laundry during a
continuing program. The drum
surface is hot.
5.14 Canceling the program
If you want to cancel the program and end
the drying operation for any reason after the
machine starts running, press the On/Off
button.
A
As it will be extremely hot inside
the machine when you cancel
the program while the machine is
in operation; run the ventilation
program to cool it down.

5.15 Program end

When the program ends, the Final/Wrinkle
Prevention, Fiber Filter Cleaning and Water
Tank Warning leds on the program follow
up indicator light up. Loading door can be
opened and machine becomes ready for a
second run.
Press the On/Off button to turn off the
machine.
C
In case the laundry is not removed
after the program is completed,
the wrinkle prevention program
that lasts 2 hours start in order to
prevent wrinkling of the laundry
that remains inside the machine.
C
Clean the fiber filter after each
drying. (See. „Fiber filter and
loading door inner surface")
C
Empty the water tank after each
drying. (See. „Emptying the water
tank")
54 / EN
Dryer / User Manual