Special Settings; Setting The Language Function; Adjusting Brightness; Demonstration Mode - Küppersbusch EEB6860.1 Bedienungsanweisung Mit Montageanweisungen

Special settings

These settings can be accessed by pressing the function selector for
6 seconds. The setting is changed by pressing the function selector or
after a few seconds without turning or pressing it, except in the language
selection function, which appears just after plugging in the oven.

Setting the language function

Select the language on the text display. This can be done after tuning the
oven on.
Turn the function selector to choose the language and next press to
accept. Once the language is selected it cannot be changed. To select
another language, unplug the oven.

Adjusting brightness

Adjust the brightness of the two displays by turning the function selector
to the right or left.

Demonstration mode

If you select ON on the text display, you will see that when you select a
cooking function, the oven will not heat up. "Demonstration Mode" will
appear on the left display every minute.
To disable the function select OFF.

Maximum cooking time

Set the maximum time in hours that the oven can operate. You can select
between 1 and 28 hours.
Active safety function
Reduce the maximum cooking temperature in all cooking functions,
between 250°C and 50°C

Eco-function

This allows you to turn off the two displays or keep them on, when
the oven is off. When the display is off (Eco-function ON), electricity
consumption is reduced. You can view the current time by pressing any
glass key or the function selector. When the oven is turned off, the display
will gradually turn itself off.
Fast heating function
You can disable (select OFF) or turn on (select ON) fast heating in the
oven's cooking functions.

Memory function

The oven has a memory function you can use to store two programmes
you have composed yourself as additional programmes.
Saving an additional programme:
Select a baking, roasting or heating programme.
Set the desired temperature and time.
Hold the memory sensor
<programme saved>.
The programme set can now be saved with
like every other baking, roasting or heating programme.
Choosing an additional programme:
Press the or sensor and confi rm by touching.
The programme starts.
The values set can be changed without such changes being saved.

Roasting

Use of the thermoprobe is recommended. The cooking time is deter-
mined by the thermoprobe, making its design ideal for roasting.

Setting a programme

1. Setting an automatic cooking recipe
The temperature is determined by the weight of the roast. The cooking
time is also determined if you intend to roast without the thermoprobe.
Both values are pre-programmed but can be changed (see previous
sections).
Before using the thermoprobe, set the weight.
Or
2. Setting a conventional cooking function
Each cooking function is associated with a pre-programmed temperature.
This temperature can be changed. You can set the cooking time and end
time. If you use the thermoprobe, you can set the cooking start time and
the oven temperature.

Turning the roast over

With the conventional cooking functions, the joint of meat must be
turned over after about 2/3 of the cooking time has passed so that it
browns evenly. If using a hot air function, you do not need to turn the
roast.
For automatic cooking recipes, once approximately 70% of the time has
passed, an alarm will sound to alert you that the roast needs turning over.
/
or depressed, until the text displays
or and can be used
35