How To Use - Zelmer ZJP3900 EasyJuice Benutzerhandbuch

EN
PL
HOW TO ASSEMBLY?
1. Follow the direction arrow, put the auger (8) inside the juicing body (11) – FIG. 3
2. Assemble the rear cover (7) into juicing body (11) as direction arrow shown – FIG. 4, step 1.
3. Turning the rear cover (7) anticlockwise, ensure the rear cove fasten together with the latch on juicing
body – FIG. 4, step 2.
4. Assemble the front cover (12) on juicing body (11) – FIG. 5, step 1
5. Turning the front cover (12) anticlockwise, ensure the front cove fasten together with the latch on juicing
body (11) – FIG. 5, step 2
6. Place the food tray (10) on the upper end of the feeding chute of the juicing body (11) – FIG. 6. The food
tray makes feeding ingredients more convenient, especially when processing small-grained ingredients
such as grapes, strawberries, etc.
7. Place the pusher (9) inside the feed chute of juicing body
8. Follow the arrow direction assemble the juicing body (11) into the slow juicer body (3). During the assem-
bling a "CLICK" sound happen indicating that all the parts were well assemble – FIG. 7
14. Place the juice cup (small shape) (5) and the pulp container (bigger shape) (6) properly – FIG. 8
15. Plug-in the product and get ready for work
Wash the fruits and vegetables, cut them into pieces that can be put into the feed inlet, and place them on
the food tray for use.
Please remove kernels, hard seeds, thick or hard shell of fruits and vegetables first.
Note: Fruits such as sugar cane, guava, and mango cannot be juiced with this machine.

HOW TO USE?

Press the switch HARD (D) or SOFT (C) FIG. 2 - the product starts to work, the working time shall be less
than or equal to 10 minutes.
Press the switch OFF (B) to switch off or stop the product.
Press the switch REV (A) when the pomace discharging is not smooth or jammed, press and hold the REV
button gently for about 2 seconds, the auger will start to reverse, then working with 10 seconds, reverse
function will automatically stop. Then you may press HARD (D) or SOFT (C) button to resume normal juicing
Caution! Do not touch the power switch with wet hands to avoid electric shock, electric leakage or fire.
Hint:
Put the ingredients into the feed inlet of the juicing body and push the ingredients with the pusher.
When ingredients are put in, the force to push the ingredients should not be so great, and it is advisable that
the ingredients just can be cut off.
Caution! Don't put your fingers or other objects into the feed inlet of the juicing body! If the pomace cup or
juice cup is full, disconnect the power and clean it before use.
When the ingredients processing is completed and there is no juice come out from juice spout, turn off the
switch and disconnect the power. Wait until the auger completely stops rotating, and then remove the juice
cup from the juice mouth.
The fresh juice should be drunk immediately. If it is exposed to the air for a while, its taste and nutritional
value will be affected. Residues cannot be stored for long periods.
Caution! Do not touch the power switch with wet hands to avoid electric shock, electric leakage or fire.
TIPS FOR FRUIT SELECTION
Select and use fresh fruits and vegetables, which contain more juice. Particularly suitable fruits include:
pineapple, celery sticks, apples, cucumbers, spinach, melons, tomatoes, oranges, grapes, and the like.
Instead of paring the thin skin of fruits and vegetables, you only need to pare the thick skin of fruits and
vegetables like oranges, pineapples, etc. Seeds of citrus fruits also need to be removed because they will
bring bitterness to the juice.
11