Brief Description Of Mainboard; Interfaces And Connectors - Fujitsu Siemens Computers D2764 Bedienungsanleitung

Brief description of mainboard

Information about boards
Be sure to observe the following for boards with ESD:
• You must always discharge static build up (e.g. by touching a grounded object)
before working with the board.
• The equipment and tools you use must be free of static charge.
• Remove the power plug from the mains supply before inserting or removing
boards.
• Always hold boards by their edges.
• Never touch connector pins or conductors on the board.
An overview of the features is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on the configuration,
your mainboard will be equipped with or provide support for certain features.
This manual describes the most important properties of this mainboard.
Additional information on mainboards is provided in the manual "Basic information on mainboard"
on the "User Documentation" or "OEM Mainboard" CD, or on the Internet.

Interfaces and connectors

The location of the interfaces and connectors of your mainboard is specified
at the beginning of the manual.
The components and connectors marked are not necessarily present on the mainboard.
External ports
The location of the external connections of your mainboard is specified at the beginning of the manual.
PS/2 keyboard port, violet (optional)
LAN port (RJ-45)
Audio input (Line in), light blue
Audio output (Line out), light green
Serial interface, turquoise
The external USB ports on the back of the computer support a
combined maximum load of 2 A.
A26361-D2764-Z110-1-7419, edition 1
All manuals and user guides at all-guides.com
Brief description of mainboard
PS/2 mouse port, green (optional)
Microphone jack (mono), pink
USB – Universal Serial Bus, black
VGA, blue
English - 1