SEVERIN PG2790 Gebrauchsanweisung Seite 12

∙ This barbecue grill is intended for
domestic use only and not for commercial
applications.
∙ In order to avoid hazards, and to comply
with safety requirements, repairs to this
electrical appliance or its power cord must
be carried out by our customer service.
If repairs are needed, please send
the appliance to our customer service
department (see appendix).
∙ This product complies with all binding CE
labelling directives.
Heating element
The junction box contains a safety switch.
Place the heating element into the grill pan.
The safety switch is activated automatically
when the heating element has been properly
fi tted. If not fi tted correctly, the appliance
cannot be switched on.
Before using for the fi rst time
∙ Remove any packaging materials from
the appliance.
∙ Clean the grill rack and grill pan with
warm soapy water; wipe thoroughly dry
afterwards.
∙ Grill assembly:
∙ Place the heating element into the grill
pan.
∙ Fit the grill rack on top.
∙ If required, additional accessories may be
fi tted according to the diagram.
∙ Fill the grill pan with water up to the 'Max'
marking.
∙ Insert the plug into a suitable earthed
power-outlet.
∙ Let the grill heat up for approximately
10 minutes without any food on the
rack. This will lessen the smell typically
encountered when fi rst switching on a
12
All manuals and user guides at all-guides.com
Grilling
∙ The grill pan must be fi lled with water up
∙ Height-adjustable models:
∙ Insert the plug into a suitable earthed
∙ Switch-type grill models:
∙ Thermostat-controlled models:
∙ After approximately 10 minutes, the heating
∙ The grill can also be used to keep the
∙ Caution: To prevent a possible build-
∙ As the water in the grill pan evaporates
new grill (a slight smell and a little smoke
may be emitted).
to the 'Max' marking.
When cooking delicate foods, the rack
should be adjusted to its highest position.
power-outlet.
Set the switch to its on position.
Turn the thermostat control knob
clockwise all the way. The indicator light
comes on, and the heating element is
permanently switched on.
element reaches the right temperature for
grilling.
food warm: by turning the thermostat
control back, the intervals between the
heating element switching on and off can
be reduced to a minimum.
up of heat and subsequent damage to
the appliance, the food to be cooked
must be placed directly onto the grill
rack. Do not place any objects (e.g.
aluminium foil, barbecue plates or
other items) between the food and the
heating element.
during grilling, it must be topped up in
good time. When adding water, ensure
that the water does not come into contact
with the heating element. Caution:
Disconnect the grill from the mains before