Operation Of The Cordless Screwdriver - BASETech 2372545 Originalbetriebsanleitung

d) Operation of the cordless screwdriver
• Keep your workplace clean. Ensure good lighting at the workplace. Disorder at
the workplace or bad lighting may cause accidents. Keep children away from the
working area! Ensure good ventilation of the workplace.
• Only operate the product when your ability to react is unrestricted. Fatigue or the
influence of alcohol or medication can lead to accidents and injury.
• Rotating parts may wind up hair or items of clothing, danger of injury! Therefore,
wear, e.g., a hair net if you have long hair, and wear close-fitting clothes when
working.
• Never touch the rotating part of the cordless screwdriver; never touch turning tool
inserts (e.g. screwdriver bits). Risk of injury! Never stop the drive manually; do not
use any tools for this either!
• Check the cordless screwdriver for damage before every use. If you find any
damage, do not take the device into operation, but have it checked by a specialist.
• For reasons of safety, the rotating direction switch must be put in the middle
position before inserting or removing bits. The drive will be blocked in this position
(activation lock).
• Use the cordless screwdriver only to turn in and out screws or for similar work. The
cordless screw driver must not be used for any other purposes (such as mixing of
mortar, driving other devices/machines/tools, etc.).
• Never overload any electrical devices. Use electrical devices only for the work
that they are intended for.
• Secure the workpiece against slipping or twisting. Use, e.g., a vice.
• Ensure safe stance when working; use, e.g., a suitable, strong ladder.
• Ensure that no power, gas or water lines are damaged when turning in screws!
With power lines, there is a danger to life from electrical shock; with gas lines,
there is a danger of fire and explosion! Water lines may also lead to high property
damage.
• Never work on live parts. When working near any electrical lines or similar, always
ensure suitable contact protection.
• Never stress the cordless screw driver to where the drive stops. This may
damage the motor and the gear both. Blocking of the drive will also lead to very
high currents, so that the rechargeable battery and the power electronics in the
cordless screw driver will be overloaded.
29