Intended Use - BASETech 2372545 Originalbetriebsanleitung

3. Intended Use

The cordless screwdriver is intended for turning in and releasing of screws. For this, use suitable
screw inserts (bits) for each case. The product has a white LED for lighting the working position
during screwing.
The cordless screwdriver is operated by a firmly installed Li-Ion rechargeable battery, which can
be charged with an enclosed charger (alternatively, the cordless screwdriver can be charged via
a USB charging port that can supply a current of at least 500 mA).
The charger is intended for operation with mains voltage (100 - 240 V/AC, 50/60 Hz).
For reasons of safety and approval, the product must not be converted and/or changed by you.
Using the product for any other purposes than those described above may damage the product.
Improper use also may cause dangers such as short circuit, fire, electric shock, etc. Read the
operating instructions precisely and keep them. Only pass the product on to any third parties
together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
23