ENGLISH
How to Use the Battery Pack
Charging the Battery Pack
1.
Move [Mode Selector] up to turn the CAM off.
2.
Attach the Battery Pack to the CAM.
3.
Fix the CAM into the cradle.
4.
Connect the jack with the cradle.
◆
Detach the jack by pressing the
buttons of the jack.
5.
Insert the AC power adapter
into the outlet.
Note
✤
You can charge the battery pack when you
use the CAM.
Connect the AC power adapter with the
CAM directly.
Warning
✤
It is recommended you fully charge the
battery pack before use.
✤
You should only charge the battery in an
environment between 0°C and 40°C.
All manuals and user guides at all-guides.com
Charging through the cradle
Charging directly to the CAM
Akku verwenden
Akku laden
1.
Drücken Sie zum Ausschalten des Camcorders den
[Moduswahlschalter] nach oben.
2.
Befestigen Sie den Akku am Camcorder.
3.
Stecken Sie den Camcorder in die Dockingstation.
4.
Verbinden Sie das Netzkabel
mit der Dockingstation.
◆
5.
Verbinden Sie das Netzteil mit
einer Steckdose.
Hinweis
✤
Der Akku kann auch aufgeladen werden,
während der Camcorder in Betrieb ist.
Verbinden Sie dazu das Netzteil direkt mit
dem Camcorder.
Achtung
✤
Es wird empfohlen, den Akku vor
Inbetriebnahme vollständig aufzuladen.
✤
Laden Sie den Akku nur bei
Umgebungstemperaturen zwischen 0 °C
und 40 °C auf.
DEUTSCH
Drücken Sie die beiden seitlich
am Stecker angebrachten Tasten,
um das Netzkabel von einem
Anschluss zu trennen.
23
23