Spare Parts; Faults; Disposal/Recycling - Nicotra Gebhardt RLM 53 Betriebsanleitung

BA-CFD-RLM 9.9 – 05/2021
The type, magnitude, and interval period as well as all works which may be necessary in
addition depend on the use and the surrounding conditions of the fan and have to be
determined case by case.
The recommendations for checks and maintenance acc. to VDMA 24186-1 may be
found at the internet site: www.nicotra-gebhardt.com.
CAUTION No high pressure cleaners (steam rod cleaners) are to be used!
7.2.1 Vibrations
The fan has be checked regularly whether vibrations may occur. The maximum vibration
speed in radial direction must not exceed 4.5 mm/s to monitored at the bearing or bearing
housing of the fan or motor. For fans of a impeller diameter up to 315 mm a vibration speed
of up to 7.1 mm/s is acceptable. When exceeding the permitted vibration values, it is
mandatory to rebalance the entire rotating unit in accordance with DIN ISO 21940-11.
7.2.2 Dismantling of the impeller
After dismantling and reinstalling an impeller, the fan must be checked for mechanical
vibrations. It may be necessary to rebalance.
7.3 Inlet and discharge connections
Flexible sleeving (compensators) between the fan and plant parts are to be checked at
regular intervals.
CAUTION Unsealed sleeving leads to breakdowns and danger from escaping transported
medium and must be replaced.

7.4 Spare parts

Only original spare parts in accordance with the Spare Parts List are to be used.
CAUTION Nicotra Gebhardt accepts no responsibility for damages resulting from the use of
other parts!

8. Faults

Deviations from normal operating conditions always lead to functional breakdowns and
should be looked for immediately by maintenance personnel.
Longer lasting faults can result in the destruction of the fan and give rise to
damage in plant parts and injuries to personnel!
In the event that the maintenance personnel cannot eliminate the fault, please make
contact with our mobile customer service.

9. Disposal/Recycling

The protection of the enviroment and the conservation of resources are important issues
for Nicotra Gebhardt GmbH. For this reason, enviromentally friendly design and
English
EN-13/18