Analogue Connections; Sleep; Alarm Clock - Kenwood M-9000S Bedienungsanleitung

Note: If an automatic connection is not possible, please proceed as follows:
Press the <MENU> button and select "View details". Then open the "Paired Device List", to select
and pair the desired terminal device. Press the <OK> button to establish the connection and "Con-
nected" appears briefly on the display.
12.3 Pair another terminal device
To connect another terminal device to the radio, please press the <MENU> button and select "Set up
Bluetooth". This will disconnect the current connection.
Now proceed as when you first connect a terminal device. Afterwards, this terminal device is also
saved in the list of paired devices and can be selected via the corresponding menu (see above). A
maximum of 8 devices can be saved.
12.4 Interrupting the Bluetooth connection
If you want to interrupt the connection to a paired device, please press the <BT PAIR> button on the
remote. The radio then switches back to pairing mode.

13. Analogue connections

13.1 Line-In
External devices such as MP3 players, DVD players or game consoles can be connected to the line-in
connection to play music. To do this, please select the source "Line-In" in the main menu.

14. Sleep

With this function you can switch the radio to standby mode automatically after a set period of time.
You can choose between 15, 30, 45 or 60 minutes, "Sleep off" deletes the previously set period
of time. To do this, press the <MENU> button while the audio source is selected and select "Main
menu". Use the <UP> or <DOWN> to navigate in the menu and select "Sleep". Use the <UP> or
<DOWN> button in the "Set sleep time" menu to select the desired time period and confirm with
the <OK> button. Exit the menus again with the <MENU> button.
The remaining time is shown in the bottom left of the display, with minutes running backwards.
15. Alarms
This radio has 2 individually adjustable alarm times. Press the <ALARM> button on the remote con-
trol and select "Alarm 1" or "Alarm 2" to make the settings.
Alternatively, you can also call up the alarm clock from the main menu. In addition, a setting on the
radio is possible using the <ALARM> button and the <TUNE> knob. In standby mode, the saved
alarm clocks of the <ALARM> button can be activated and deactivated. The following options are
available for programming the alarm clock:
20