Charging Procedure; Technical Data - Worx WA3883 Bedienungsanleitung

1. BATTERY PACK*
2. CHARGER
3. CHARGE INDICATOR LIGHT
*Not all the accessories illustrated or
described are included in standard delivery.
We recommend that you purchase your accessories
listed in the above list from the same store that
sold you the battery charger. Refer to the accessory
packaging for further details. Store personnel can
assist you and offer advice.

TECHNICAL DATA

Rated input voltage
Rated input power
Charger output 1
Charger output 2
Charge battery
Charging time (approx.)
Battery pack: 2.0Ah (1pc)
2.0Ah (2pcs)
4.0Ah(1pc)
4.0Ah(2pcs)
6.0Ah(1pc)
6.0Ah(2pcs)
Protection class
Machine weight
* Charger output 1 and output 2 mean two ports
with the same output voltage and current.
For the technical data of the types, the number of
cells and the rated capacity of the batteries that
can be charged, please refer the nameplate of the
battery pack supplied by WORX.
Dual Port Battery Charger

CHARGING PROCEDURE

CHARGING INSTRUCTIONS
1. CHARGING YOUR BATTERY PACK
The charger is designed to charge one or two
battery packs at the same time.
not attempt to use any other devices. Never insert
or allow metallic objects into your charger or battery
pack connections because an electrical failure and
hazard will occur.
2. BEFORE USING YOUR CORDLESS TOOL
Your battery pack is UNCHARGED and you must
charge once before use.
100-240V~50-60Hz
3. HOW TO CHARGE YOUR BATTERY
CHARGING PROCEDURE
100W
1)
2)
20V d.c., 2A *
20V d.c., 2A *
Li-Ion
to direct sunlight or heat, allow time for the
battery to cool down before re-charging to
0.5hr
achieve the full charge.
1hr
CHARGING INDICATOR
This charger is designed to detect some problems
1hr
that can arise with battery packs. Indicator lights
indicate problems (see table below). If this occurs,
2hr
insert a new battery pack to determine if the charger
is OK. If the new battery charges correctly, then the
1.5hr
original pack is defective and should be returned
to a service center or recycling service center. If the
3.0hr
new battery pack displays the same problem as the
original Battery Pack, have the charger tested at an
/II
authorized service center.
0.95kg
Red on
Red flash
NOTE: Before using the tool, read the
instruction book carefully.
WARNING: The charger and battery pack are
specifically designed to work together so do
Plug the charger into an appropriate outlet.
Slide one or two battery packs into the charger.
Normally, the relevant charge indicator light (3)
will flash in green color showing the battery is
being charged.
WARNING: When battery charge runs
out after continuous use or exposure
Light ON/ Flash
Defective Battery
Battery Temperature
Protection
- - - - - The temperature of battery
pack is less than 0
more than 45
5
Status
o
C or
o
C.
EN