Advice And Checks; Battery Charger - CBE A915 Gebrauchsanweisungen

ADVICE AND CHECKS

IMPORTANT: - The installation of this device must be carried out by specialized technicians.
- In case of battery charger's misuse, the guarantee falls off and the manufacturer
declines all responsibility for damages to people and things.
- Do not carry out any maintenance when the battery charger is connected to the
230V power supply net.

BATTERY CHARGER

- Install the battery charger in a dedicated room, dry and ventilated; fix it in a proper way.
- Do not cover air intakes and assure an appropriate ventilation.
- Before disconnecting the battery charger from 230V power supply, turn the security switch off.
CABLES
- Use cables with appropriate section, minimum cross section area 4 mm².
- Protect cables from any possible damage.
SPECIFIC ATIONS
Mains input voltage
Max. power
Charge current
- nominal
- arithmetic
Current control
Consumption (no connected mains)
Automatic control of charge cycles
- Max charge
- Maintenance
Commutator for battery choice (Pb or Gel)
Charge system
Length of 14,4V end-charge phase
- Lead type battery
- Standing type battery
Overload protected
Overtemperature protected
Inversion polarity protection
Security on/off switch
12V fuse
230V fuse
Charge signalled by LED
230V connection
Battery connection
Mains signal connection
Anodized aluminium case
Dimensions (mm)
Weight (Kg)
Always provided
All manuals and user guides at all-guides.com
5
A915
230 Vac 50 Hz / 12Vdc
180 VA
15 A
13 A
0,3 mA
25°C
14,4V
13,8V
Buffer battery
20 min.
380 min.
car type 20A
internal 3,15A
Schuko plug
Terminals 6,3
Terminals 6,3
160 x 200 H105
3,8