Power On/Off - EDIFIER W180T Bedienungsanleitung

EN

Power ON/OFF

1. Power ON when taken out of the case.
2. Power OFF when placed in the case.
Pairing
1. Taken out of the case.
2. Press and hold the touch panel on either earbud for 1-3s. Red and Blue LED will blink rapidly.
3. Select "EDIFIER W180T L" or "EDIFIER W180T R" in your device setting to connect.
Pairing for the first time
1. Taken out of the case. Red and Blue LED will blink rapidly.
2. Select "EDIFIER W180T L" or "EDIFIER W180T R" in your device setting to connect.
Note:
1. For subsequent use, the earbuds will auto-connect to device used last time.
2. After you complete the Bluetooth pairing between the one earbud and the mobile phone, you can also
repeat the above steps to pair the other earbud with the mobile phone to realize the operation of any
single earbud.
Reset
1. Taken out of the case.
2. The earbuds are not connected and not connected with any Bluetooth devices.
3. Respectively press and hold the touch panel on earbuds for 8s, Blue LED blinks 6 times rapidly and turn
off, then the pairing record will be cleared.
Blue LED lit for 1s
1-3s
Indicator
8s
Indicator
1-3s
Indicator
8s
Indicator