Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Mode Function - Silvercrest SSA01B Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

˜ Technical data
Operating voltage
Rated current
Rated power
Protection class
Ingress protection
Model number
HG09690B
HG09690B-FR
˜ Before first use
Indoor use
Plug the product into power supply which
should near window in order for the twilight
sensor 
to differentiate between night and
[
3 ]
day.
Outdoor use
Plug the product into an outdoor splash-proof
power outlet.
The power plug of the connecting device must
also be splash proof.
Close the cover
1 ]
[
device is connected to the product.
Attention:
Without light near the twilight sensor
prevent malfunction.
The twilight sensor
3 ]
[
in any way.
The product should not be located directly next
to the window to avoid direct sunlight.
˜ Mode Function
OFF - The connected device is OFF
ON - The connected device is ON
2Hrs - The connected device will be on at
dusk; and countdown switch OFF in 2 hours
automatically. The product turns off automatically
when the countdown elapses.
8
GB
230 V∼, 50 Hz
5 A
max. 1150 W
I /
IP44
while without connecting
to
3 ]
[
should not be covered
Max. total output
1150 W (5 A)
1150 W (5 A)
4Hrs - The connected device will be on at
dusk; and countdown switch OFF in 4 hours
automatically. The product turns off automatically
when the countdown elapses.
6Hrs - The connected device will be on at
dusk; and countdown switch OFF in 6 hours
automatically. The product turns off automatically
when the countdown elapses.
8Hrs - The connected device will be on at
dusk; and countdown switch OFF in 8 hours
automatically. The product turns off automatically
when the countdown elapses.
DUSK-DAWN : The connecting device turns on
automatically at DUSK. The connecting device
turns off automatically at DAWN.
Hints
In the process of countdown, if twilight sensor
detects the day light, the countdown function
4 ]
[
will be disabled, If it detects the dusk again, the
countdown will re-start from the very beginning.
In the process of countdown, if change the mode
manually. This will disable the current one, and
enter into the new one.
˜ Turning On/ off
Turn off the connecting device which will
connect
Plug the connecting device into the power
outlet
of the product.
2 ]
[
Plug the product from the power supply.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis