Technical Data - Husqvarna K 770 Bedienungsanweisung

Technical data

Cylinder displacement, cm
Cylinder bore, mm/in.
Travel length, mm/in.
Idle speed, rpm
Fully opened throttle, no load, rpm
Power, kW/hp @rpm
Spark plug
Electrode gap, mm/in.
Fuel tank capacity, liters/US fl oz
Recommended water pressure, bar/PSI
Weight
Power cutter without fuel and cutting blade 300mm
(12in.), kg/Ib*
*Rescue shoulder strap, additional 0.4kg/0.9lb.
Power cutter without fuel and cutting blade 350mm
(14in.) kg/Ib
Spindle, output shaft
Max. spindle speed with cutting blade 300mm
(12in.), rpm
Max. spindle speed with cutting blade 350mm
(14in.), rpm
Max. peripheral speed, m/s or ft/min (300mm/12in.)
Max. peripheral speed, m/s or ft/min (350mm/14in.)
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
Equivalent sound pressure level at the ear of the op-
2
erator, dB (A)
1
Noise emissions in the environment are measured as sound power (L
2000/14/EC. The difference between guaranteed and measured sound power is that the guaranteed sound
power includes dispersion in the measured result and variations between different units of the same product
according to directive 2000/14/EC.
2
Equivalent sound pressure level, according to EN ISO 19432-1, is calculated as the time-weighted energy to-
tal for different sound pressure levels in various working conditions. Reported data for equivalent sound pres-
sure level for the product has a typical statistical dispersion (standard deviation) of 1 dB (A).
34
Technical data
3
/cu.in.
1
dB (A)
WA
K 770, K 770 OilGuard, K 770 Rescue
74/4.5
51/2
36/1.4
2700
9300 (+/- 150)
3.7 /5 @9000
NGK BPMR 7A
0.5/0.02
0.9/30
0.5-10/7-150
10/22
10.1/22.3
4700
4700
80 or 16000
90 or 18000
113
115
101
) in conformity with directive
WA
K 770 SmartGuard
74/4.5
51/2
36/1.4
2700
9300 (+/- 150)
3.7 /5 @9000
NGK BPMR 7A
0.5/0.02
0.9/30
0.5-10/7-150
10.8/23.8
11.1/24.5
4700
4700
80 or 16000
90 or 18000
113
115
101
1447 - 004 - 04.05.2021