Automatic Shut-Off - Bosch IR LD 1.0 CO2 Bedienungsanleitung

!
With the alarm muted, a bell
icon and the relative leak size
indicator will appear when
refrigerant (CO2) is detected
(see Fig. 11 and Fig. 12; item
12c).
A
CO₂
Fig. 11: Alarm indication with audio
muted (shown in Automatic
mode)
To turn audio on:
¶
Press the Audio ON/OFF button
(See Fig. 12; item 12a or Fig. 2
item 4).
 The × on speaker icon will no
longer appear.
 The bell icon will no longer be
displayed at detection.
12a
12b
Fig. 12: Audio and Alarm indication
Icons
Bosch Automotive Service Solutions GmbH
Operating instructions | IR LD 1.0 | 29 | en
i
A few seconds is required to
restore sound, if the Audio ON/
OFF button is pressed in rapid
succession.
6.7
If the IR LD 1.0 remains idle (i.e. no
100%
change in detection level) for a pe-
riod of 10 minutes:
 A 30 second countdown timer
 The alarm will silence during
 The alarm will beep during the
 The unit will automatically shut
 If the alarm is triggered or a
12c
Fig. 13:

Automatic shut-off

with a flashing power icon is dis-
played (see Fig. 13).
this countdown, if Audio is set
to ON, .
countdown, if Audio is set to
OFF.
itself off, after 30 seconds, to
help extend the battery's life.
button is pressed, the 10 min-
ute internal timer will reset.
Auto shut off
SP01502142 | 14.03.2022