Technical Specifications - RoDEK R680A2 Installationsanleitung

5. TECHNICAL SPECIFICATIONS

Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<0.1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Damping Factor @ 4 Ohms Load
All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
Operation Mode set to FULL,
All Channels driven simultaneously
Channel Separation
All Channels
Input Sensitivity
All channel Pairs
Integrated Cross-Over/Filtering
Slope Rates
Highpass Cross-Over Frequency Range
Lowpass Cross-Over Frequency Range
Fuses
Dimensions (W x H x D)
26
RODEK R680A2
6x97W
6x105W
6x135W
4x100W/1x260W CH5/6 bridged into 4Ohms
> 200
> 95dB
10Hz - 40kHz
> 55 dB
0.2V - 9V
12 dB/Octave High-&Lowpass
continuously variable 10 - 400 Hz
continuously variable 30 - 400 Hz
4 x 30 A
533 x 61 x 265 mm