Technical Specifications - RoDEK r2175frd Installationsanleitung

R2175FRD_Manual 2003 25.04.2003 16:57 Uhr Seite 22
6. TECHNISCHE DATEN
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<0.1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<0.1%)
Rated Power Output
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Rated Power Output Bridged (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Damping Factor @ 4 Ohms Load
All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
Operation Mode set to FULL,
All Channels driven simultaneously
Channel Separation (All Channels)
Input Sensitivity (All Channel Pairs)
Integrated Crossover
Highpass Filter (12dB/oct. slope)
Lowpass Filter (12dB/oct. slope)
Mini ATC Fuses
Dimensions (W x D x H)
22
R2175FRD R480FRD
2 x 130 W 4 x 70 W
2 x 197W 4 x 103 W
2 x 167 W 4 x 76 W
1 x 359 W 2 x 168 W
> 150 >150
> 95dB > 95 dB
10 Hz – 25 kHz 10 Hz – 25 kHz
> 55 dB > 60 dB
200 mV – 6 V 200 mV – 6 V
50 Hz – 250 Hz 50 Hz – 250 Hz
50 Hz – 250 Hz 50 Hz – 250 Hz
2 x 25 A 2 x 25 A
335 x 213 x 34 mm 335 x 213 x 34 mm