Technische Spezifikationen; Technical Specifications - RoDEK RI-4100 Installationsanleitung

6. TECHNICAL SPECIfICATIONS

Rated Power Output
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Rated Power Output
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<1%)
Rated Power Output
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%) Bridged
Damping Factor @ 4 Ohms Load All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
Operation Mode set to FULL,
All Channels driven simultaneously
Channel Separation
All Channels
Input Sensitivity
All channel Pairs
Integrated Cross-Over/Filtering
Slope Rates
Highpass Cross-Over Frequency Range
Lowpass Cross-Over Frequency Range
Fuses
Dimensions (W x H x D)
38
RI-Amp 1-2-4-CH Manual_D+E.indd 38
RI-4100 RI-2135
4x85W
4x140W
2x250W
> 75
> 88dB
10Hz - 40kHz 10Hz - 40kHz
> 50dB
0.2V - 8V
12 dB/Octave High- & Lowpass
continuously variable 50 - 250 Hz
continuously variable 50 - 250 Hz
3 x 25 A
431 x 81 x 298 mm 431 x 81 x 298 mm
RI-1650D
2x125W 1x520W
2x200W 1x910W
1x400W n/a
> 75 > 200
> 88dB > 70dB
10Hz - 400Hz
> 50dB n/a
0.2V - 8V 0.2V - 8V
10 - 50 Hz
40 - 400 Hz
3 x 25 A 4 x 30 A
581 x 81 x 298 mm
05.01.2008 12:33:14 Uhr