Restore Factory Settings; Maintenance/Cleaning; Maintenance - Silvercrest SBTF 10 F2 Bedienungsanleitung Und Sicherheitshinweise

9.15 Restore factory settings

You can restore the hands-free kit to its factory settings. Doing so will delete the list of
connected devices in the hands-free kit.
Proceed as follows:
•
With the hands-free kit switched on, hold down the + button (2) and - button (9)
simultaneously for about five seconds until a signal tone sounds and the announcement
'Device switching off' is made.
•
Now switch off the hands-free kit at the ON/OFF switch (5) to complete the process.
The next time you switch on the hands-free kit, it starts directly in pairing mode and the
phone button (4) alternates between flashing blue and orange.

10. Maintenance/cleaning

10.1 Maintenance

WARNING! Repair work is required if the hands-free kit has been damaged, for
example if the device housing is damaged, liquids or objects have got inside the
device, or if the device has been exposed to rain or moisture. Repairs are also
required if the device does not work properly or has been dropped. Never open the
housing of the hands-free kit. Furthermore, opening the hands-free kit could damage it
and void your guarantee.
SilverCrest SBTF 10 F2
English - 111