Installation - Siemens SITRANS LR200 Kurzanleitung

Non-sparking/
Energy Limited
• Hazardous (continued)
Non-incendive
• Marine Lloyd's Register of Shipping
ABS Type Approval
Pressure Application
WARNINGS:
• Never attempt to loosen, remove, or disassemble process connection or instru-
ment housing while vessel contents are under pressure.
• Improper installation may result in loss of process pressure.
Pressure Equipment Directive, PED, 97/23/EC
Siemens Level Transmitters with flanged, threaded, or sanitary clamp type process mounts
have no pressure-bearing housing of their own and, therefore, do not come under the Pressure
Equipment Directive as pressure or safety accessories, (see EU Commission Guideline 1/8).
3)

Installation

WARNINGS:
• Installation shall only be performed by qualified personnel and in accor-
dance with local governing regulations.
• Materials of construction are chosen based on their chemical compatibility (or
inertness) for general purposes. For exposure to specific environments, check
with chemical compatibility charts before installing.
• Handle the device using the enclosure, not the antenna or the device tag, to
avoid damage.
Notes:
• The Process Device Tag shall remain with the process pressure boundary assembly
the event the device package is replaced, the Process Device Tag shall be transferred to
the replacement unit.
• SITRANS LR200 units are hydrostatically tested, meeting or exceeding the requirements
of the ASME Boiler and Pressure Vessel Code and the European Pressure Equipment
Directive.
1)
Non-Sparking/Energy Limited wiring
See
2)
Non-incendive wiring (US only)
See
3)
The process pressure boundary assembly comprises the components that act as a barrier against
pressure loss from the process vessel: that is, the combination of process connection body and emit-
ter, but normally excluding the electrical enclosure.
Page EN-4 SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
1)
(Europe)
2)
(US)
on page 10.
on page 10.
ATEX II 3 G Ex nA/nL IIC T4 Gc
FM: Class I, Div. 2,
Groups A, B, C, D T5
3)
. In
A5E32153438