Herunterladen Inhalt Inhalt Diese Seite drucken

Siemens SITRANS LR200 Kurzanleitung Seite 13

Vorschau ausblenden Andere Handbücher für SITRANS LR200:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 63
Instructions specific to hazardous area installations
(Reference European ATEX Directive 94/9/EC, Annex II, 1/0/6)
The following instructions apply to equipment covered by certificate number SIRA 06ATEX2356
and SIRA 09ATEX4152X:
1) For use and assembly, refer to the main instructions.
2) The equipment is certified for use as Category 1G equipment per SIRA 06ATEX2356X, and
Category 3G equipment per SIRA 09ATEX4152X.
3) The equipment may be used with flammable gases and vapors with apparatus groups IIC,
IIB, and IIA, and temperature classes T1, T2, T3, and T4.
4) The equipment is certified for use in an ambient temperature range of –40 °C to +80 °C.
5) The equipment has not been assessed as a safety related device (as referred to by Direc-
tive 94/9/EC Annex II, clause 1.5).
6) Installation and inspection of this equipment shall be carried out by suitably trained per-
sonnel in accordance with the applicable code of practice (EN 60079-14 and EN 60079-17 in
Europe).
7) The equipment is non-repairable.
8) The certificate numbers have an 'X' suffix, which indicates that special conditions for safe
use apply. Those installing or inspecting this equipment must have access to the certifi-
cates.
9) If the equipment is likely to come into contact with aggressive substances, then it is the
responsibility of the user to take suitable precautions that prevent it from being adversely
affected, thus ensuring that the type of protection is not compromised.
Aggressive substances:
Suitable precautions:
Programming SITRANS LR200
Quick Start Wizard via the handheld programmer
• See
Quick Start Wizard via SIMATIC PDM
• See
Activating SITRANS LR200
Power up the device. SITRANS LR200 automatically starts up in Measurement mode.
A5E32153438
SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
e.g. acidic liquids or gases that may attack metals, or
solvents that may affect polymeric materials.
e.g. regular checks as part of routine inspections or
establishing from the material's data sheet that it is resistant
to specific chemicals.
on page 18
on page 16
Page EN-11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis