Specifications; Ambient/Operating Temperature - Siemens sitrans LR200 Schnellstartanleitung

SITRANS LR 200
WARNING: Changes or modifications not expressly approved by Siemens
Milltronics could void the user's authority to operate the equipment.
Notes:
• This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
• SITRANS LR 200 is to be used only in the manner outlined in this manual, otherwise
protection provided by the equipment may be impaired.
SITRANS LR 200 is a 2-wire loop-powered, continuous level measuring instrument that utilizes
advanced pulse radar technology at 5.8 GHz (6.3 GHz in North America). The instrument
consists of an electronic component coupled to the antenna and process connection.
Communication is via HART

Specifications

For a complete listing, see the SITRANS LR 200 Instruction Manual. For Approvals information,
please refer to the process device tag.

Ambient/Operating Temperature

Note: Process temperature and pressure capabilities are dependent upon information
on the process device tag. The reference drawing listed on the tag can be downloaded
from the Siemens Milltronics website at www.siemens-milltronics.com
ambient temperature
(surrounding enclosure volume)
o o o
–40 C to 80 C (–40
2
locking ring over threaded connection;
secured by three 2 mm Allen set-screws
process temperature
o o o
–40 C to 80 C (–40
1.
HART®is a registered trademark of the HART Communication Foundation.
2.
When the locking ring is secured, it prevents the enclosure rotating on the threaded connection.
Page EN-2 SITRANS LR 200 – QUICK START MANUAL
1
, and signals are processed using Sonic Intelligence®.
2
hand programmer
o
F to 176 F)
o
F to 176 F)
nameplate
process device
tag
customer-supplied
flange
7ML19985QL81