Specifications - Siemens sitrans LVS200 Bedienungsanleitung

Specifications

Note:
Siemens Milltronics makes every attempt to ensure the accuracy of these
specifications but reserves the right to change them at any time.
SITRANS LVS200
Power
• 19 to 230 V AC, +10 %, 50 to 60 Hz, 8 VA
• 19 to 55 V DC, +10 %, 1.5 W
Performance
Measuring frequency
• standard
• liquid/solid interface version
Signal delay
• probe uncovered to covered
• probe covered to uncovered
Relay delay
• approx. 1 second from loss of vibration
• 1 to 2 seconds from resumption of vibration
Sensitivity
• high or low, switch selectable
Minimum Material Density
• standard
• liquid/solid interface version
Alarm Output
• relay failsafe
• relay 8 A at 250 V AC, non-inductive
relay 5 A at 30 V DC, non-inductive
Page EN-4 SITRANS LVS200 – INSTRUCTION MANUAL
approx. 125 Hz
approx. 350 Hz
approx. 1 second
approx. 1 to 2 seconds
3
approx. 20 g/l (1.2 lb/ft
3
approx. 50 g/l (3 lb/ft )
high or low, switch selectable
)
7ML19985FT61