Operation and configuration
Setting the areas for motion detection
If you only wish to be notified that an event was detected within a
certain area of the acquired image, you can use this function.
This device supports up to 3 areas for detecting motion. To set up
the areas, mark "Region 1" (yellow square) and/or "Region 2" (green
square) and/or "Region 3" (red square). Use the mouse to adjust the
size and position of the squares to the image.
00053157
Field
Remark
You can set the sensitivity for detecting
Sensitivity
motion here.
Click this button to update the image so
Refresh
that you can make real-time adjustments
to the regions for motion detection.
Click this button to save the current
Save
region settings.
g
99