Startup
Establishing connection to the device
NOTE
►
The device can be configured via the LAN connection in its
default delivery state.
Connect the device to your local network as described in the sec-
tion
Start the "IPCam Admin Utility" programme by double-clicking the
icon on the desktop.
The programme searches the network for appropriate devices.
Appropriate devices detected in the network are listed in the main
window of the programme.
NOTE
►
If the device is not recognised after about 1 minute, check the
power supply and network connection to the device. The yellow
00053157
Connecting the camera to the network
4
network LED
must light up constantly.
(LAN).
g
75