Startup
Connecting the mains adapter
Insert the mains adapter plug into the socket
Insert the mains adapter into the mains socket. The
3
Connect the camera to the network (LAN)
Connect the RJ-45 network cable supplied to the
RJ-45 network connector
Insert the other end of the network cable into the network socket
or the switch/router.
NOTE
►
►
Startup
Switching the device ON and OFF
NOTE
►
The device has no ON/OFF switch. Disconnect the mains
adapter from the mains socket to switch off the device.
00053157
lights up.
The
network LED
network.
The
. network LED
work.
6
8
.
4
lights up during connection to the
4
flashes during access to the net-
g
of the device.
Status LED
69