Technische Spezifikationen; Technical Specifications - RoDEK R1900N Installationsanleitung

. TECHNICAL SPECIfICATIONS

Rated Power Output
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Rated Power Output
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<1%)
Rated Power Output
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%) Bridged
Rated Power Output
All channels driven simultaneously
@ 13.8 V into 1 Ohm (THD<1%)
Damping Factor @ 4 Ohms Load All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
Operation Mode set to FULL,
All Channels driven simultaneously
Channel Separation
All Channels
Input Sensitivity
All channel Pairs
Integrated Cross-Over/Filtering
Slope Rates
Highpass Cross-Over Frequency Range
Lowpass Cross-Over Frequency Range
Fuses
Dimensions (W x H x D)
0
R4100N R2200N
4x85W
4x140W
2x250W
n/a
> 200
> 85dB
10Hz - 40kHz
> 50dB
0.2V - 9V
12 dB/Octave High- & Lowpass
continuously variable 10 - 400 Hz
continuously variable 40 - 400 Hz
3 x 25 A
395 x 56 x 229 mm 420 x 56 x 229 mm
R100N
2x180W
2x280W
1x400W
n/a
> 200
> 85dB
10Hz - 40kHz 10Hz - 400Hz
> 50dB
0.2V - 9V
40 - 400 Hz
3 x 25 A
360 x 56 x 229 mm
1x350W
1x600W
n/a
1x1000W
> 200
> 85dB
n/a
0.2V - 9V
10 - 50 Hz
4 x 30 A