Technische Spezifikationen; Technical Specifications - RoDEK R550A Installationsanleitung

5. TECHNICAL SPECIFICATIONS

Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<0.3%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<0.3%)
Damping Factor @ 4 Ohms Load
All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
Operation Mode set to FULL,
All Channels driven simultaneously
Channel Separation
All Channels
Input Sensitivity
All channel Pairs
Integrated Cross-Over/Filtering
Slope Rates
Highpass Cross-Over Frequency Range
Lowpass Cross-Over Frequency Range
Fuses
Dimensions (W x H x D)
R550A
4 x 35 W & 1 x 125 W
4 x 55 W & 1 x 200 W
> 100
> 90dB
10Hz – 30kHz
> 55 dB
0.2V - 4V
12 dB/Octave High-&Lowpass
continuously variable 40 - 220 Hz
continuously variable 40 - 220 Hz
ATC - 2 x 30 A
250 x 48 x 181 mm
21