Accessories Storage; Hoses Storage; Service; General Inspection - Westfalia ALK 18 Originalanleitung

 Thread the Presta valve adaptor onto the valve stem with the
adaptor's interior threads.
 Position the air chuck clamp in the unlock position.
 Clamp the end of the air chuck down onto the Presta valve adaptor
by pressing air chuck clamp down until it locks into place.
 Inflate the tyre.
 After inflation, remove air chuck and Presta valve adaptor and
tighten locking nut with your fingers. Do not use tools.

Accessories Storage

When not in use, adaptors and needles provided with the compressor
can be placed in the storage area (9) located on the right side of the
compressor.

Hoses Storage

When not in use, the hoses provided with the inflator can be placed ln
the storage areas located on both sides of the compressor.

Service

Warning: Always disconnect from the mains power supply, before
carrying out any maintenance/cleaning of the charger. Remove the
battery before carrying out any maintenance/cleaning of the tool.
Note: Both the tool and the charger contain no user-serviceable parts.
If the device does not perform as outlined in this manual, turn to the
Westfalia customer service or to a competent professional.

General Inspection

 Regularly check that all the fixing screws are tight as they may
become loosened during use due to vibration.
 Inspect the supply cord of the charger for damage or wear prior to
each use. Repairs should be carried out by an authorised service
centre. This advice also applies to extension cords used with this
tool.
Operation
29