Inflating Manually For High And Low Pressure Applications; Accessories; How To Use The Sport Ball Needle; How To Use The Presta Valve Adaptor - Westfalia ALK 18 Originalanleitung

Inflating manually for high and low Pressure Applications

 Connect either high or low pressure hose to the compressor and to
the item to be inflated.
 Set the main switch to I or II (low or high pressure) until desired
pressure is reached.
Note: Stand half a metre away from item being inflated.
 Set the main switch to O.

Accessories

The supplied accessories perform a variety of functions.
The tapered adaptor can be used on smaller pinch valves to inflate
items like floats and children's toys, which usually require the user to
inflate them by blowing air into item. The sport ball needle can be used
to inflate any type of sports ball or any other item that requires an
inflation sport ball needle.
Note: When inflating items of 1 o PSI or lass, inflate ln short bursts and
check after each burst by feel or with a calibrated measuring device to
determine accurate pressure.

How to use the Sport Ball Needle

• Insert the needle into the air chuck on the hig pressure hose (1) and
push the air chuck clamp down until it locks into place. Inflate to the
desired pressure.
• Insert the moistened sport ball needle into sports ball valve and
inflate.
• Remove sport ball needle from the ball and from the air chuck after
Inflation.
Note: The pressure required for most sports balls ls too low for
accurate reading on gauge.

How to use the Presta Valve Adaptor

The Presta valve adaptor can be used for Presta valve
stems as described below. Before inflating a tyre with a
Presta valve, loosen the locking nut on top of the valve.
Once Inflation is complete, tighten the locking nut 1o seal
the tyre valve.
 Loosen the Presta valve locking nut.
Operation
28