Changing The Carbon Brushes; Replacement Battery; Battery Disposal - Westfalia 83 55 05 Originalbetriebsanleitung

Note: Immediately switch OFF the reciprocating saw,
- if smoke or sparks are observed coming from or around the collector
resp. the rotor,
- if the reciprocating saw does not function properly or only intermittently
when the battery, charger, plug, power cable or switch are damaged,
- if smoke or a strong smell of burned insulating material is observed,
- if the saw blade comes loose, is crooked or damaged,
- if the motor runs irregularly or jams,
- if the saw blade jams. Slightly open the sawn split in the workpiece and
extract the saw blade. Do not try to finish the cutting process with a
jammed saw blade to avoid injury or damaging the reciprocating saw and
the saw blade.

Changing the Carbon Brushes

Have the carbon brushes only replaced by an expert or contact our customer
service.

Replacement Battery

A suitable replacement battery for the cordless reciprocating saw can be ordered
from Westfalia:
Art. No. 83 56 42

Battery Disposal

1. Run the motor until the battery is completely discharged.
2. Remove the battery from the cordless reciprocating saw. Depress the battery
releasing button (9) and pull out the battery from the tool.
3. Wrap strong insulating tape around the battery terminals or enclose in a
sealable plastic bag to prevent possible shorting.
4. Dispose of batteries through your local waste removal authority.
Using
21