Kärcher KM 120/250 R Bp Betriebsanleitung Seite 24

2
1
1 Lock, filter cover (2x)
2 Filter cover
 Open the lock.
 Open filter cap.
1 Cross struts
2 Dust filter
 Check the dust filter, clean or replace if
necessary.
Note
The dust filter may only be replaced by
Kärcher Customer Service.
 Insert and lock the filter cover.
Changing the headlight bulb (option)
 Unscrew the head lamps.
 Take out the head lamps and pull out
the plug.
Note: Note the positions of the plugs.
 Dismantle the head lamps.
 Dismantle the head lamp casing and
hold it horizontally because the lamp
unit is not fastened.
 Unlock the bracked and take out the
bulb.
 Insert new bulb.
 Reinstall in reverse sequence.
Changing the blinker bulb (option)
Note: Remove the glass of the direction-in-
dicator lamp from its casing to replace the
bulb.
Replacing fuses
1 Lock nut
2 Cover fuse box
 Unscrew the knurled nut.
 Open the cover on the fuse box.
 Check the fuses.
 Replace defective fuses.
24
Note: Only use fuses with identical
safety ratings.
FU 01 Safety relay
Drive pedal
FU 02 Multifunction display
FU 03 Battery shut-off
FU 04 Driving direction
switch
FU 05 Drive control
FU 06 Vibrator system
FU 07 Suction system con-
trol
FU 08 Beacon lamp
FU 09 Horn
FU 10 Lights
FU 11 Wiper
FU 12 Driver cabin (option-
al)
FU 13* Drive motor
FU 14* Electro motor
FU 15* Suction blower
* These fuses may only be changed by
Customer Service, as it is necessary to
check the device for potential faults.
EN 10
-
3 A
5 A
3 A
3 A
3 A
15 A
3 A
7.5 A
7.5 A
15 A
3 A
10 A
225 A
100 A
20 A