Operating And Functional Elements - Kärcher KM 120/250 R Bp Betriebsanleitung

Illustration of sweeper
Illustration
1 Nameplate
2 Seat (with seat contact switch)
3 Steering wheel
4 Lock of appliance hood
5 Cover
6 Side brush, right
7 Front wheel
8 Roller brush access
9 Lashing point
10 Beacon lamp
11 Appliance cover right side
12 Cover, right
13 Tail panel
14 Drive wheel
15 Cover, left
16 Bonnet left side (engine bonnet)
17 Battery set
(only included with the scope of delivery
for the KM 120/250 R Bp Pack)
18

Operating and Functional Elements

Operating field
Illustration
1 Roller brush and side brush control le-
ver
Lever forwards: Switches the roller
brush on and lowers and switches the
side brushes on.
Lever backwards: Switches the roller
brush on
2 Control lever waste container
Raise/lower waste container
3 Roller brush control lever
Raises and lowers the roller brush
4 Control lever container flap
Open/close container lid
5 Indicator lamps and display
6 Switch blower and filter cleaning
Position centred: Filter cleaning and
blower off
Rear position: Blower on
Front position: Filter cleaning on
7 Horn switch
8 Fuses
9 Ignition lock
Position 0: Switch off engine
Position 1: Ignition on
EN
Position 2: Start the engine
10 Blinker switch
11 Parking brake
12 Roller brush wear adjustment / sweep-
ing area setting
13 Battery socket
Pedals
Illustration
1 Brake pedal
2 Drive pedal
Indicator lamps and display
Illustration
1 Battery capacity
2 Battery control lamp
3 Control lamp operating state
4 Indicator lamp for position lights
5 Indicator lamp (not connected)
6 Indicator lamp for dipper
7 Indicator lamp (not connected)
8 Indicator lamp - forward driving direc-
tion
9 Indicator lamp - reverse driving direc-
tion
10 Operating hour counter
4
-