Siemens 5WG1 372-5EY01 Bedienungsanleitung Seite 52

10.0 Changing Stored Program
Any program already stored, whether weekly or yearly can be changed depending
on individual requirements.
Condition: Cursor must be in the interrogation menu (?).
Example:
Illustration 1: example: free memory locatins 304
Illustration 2: Button 1 of selected Channel C1
Illustration 3: By repeatedly pressing the Enter Button, call up the switching
time to be changed
Illustration 4: Button P = adjustment
Illustration 5: e.g. Channels C2, C4 ON
– change channel sequence: with Button 1, 2, 3, 4
– afterwards store with Enter Button
– retain channel sequence: progress with Enter Button
Illustration 6: Store channel selection
Illustration 7: Switching status e.g. switch ON
– change switching status: with Button 0,1
– retain switching status: progress with Enter Button
Illustration 8: Programmed weekdays
– switching times are effected on the day, Mo to Fr (1 – 5)
– changing weekdays: e.g.: not Wed, Sat, Sun
press Button 3, 6, 7
– retain weekdays: progress with Enter Button
Illustration 9: Store change
Illustration 10: Change switching time: e.g. 7.45 press Button 7, 4, 5
– afterwards store with Enter Button
– retain switch time: progress with Enter Button
Illustration 11: Search for additional switching times, press Enter Button
1)
Select
3)
Search
Channel
Confirm
Hours
52
Channel 1
Change
Confirm
Weekdays
Minutes
Additional changes as described, or
back into the automatic program
(Auto) with Button v.