Siemens 5WG1 372-5EY01 Bedienungsanleitung Seite 46

7.4 Programming Pulse Program
Example: Channels C1 and C2 pulse duration: 5 secs from Mon to Fri at 7.15.
Place cursor in pos.
Channel 1 + 2
Select
Confirm Switch ON
Confirm Days
Week Days
Minutes
Hours
Store
Pulse 5 sec.
Note After a time adjustment, pulses are only effected, which are programmed at
least one minute after the time adjustment.
8.0 Priority Program
With the time switches up to 9 different weekly programs can be
performed in addition to the normal weekly program. A firm weekly program
P1 ... P9 can be requested at any fixed periods of time.
That is, the programming consists of:
1. Setting the weekly program (see Chapter 8.1)
2. Setting commencement and completion date (see Chapter 8.2)
If the time period of several weekly programs cut across one another, the pro-
gram with the highest index number prevails e.g. weekly program P9 prevails
over weekly program P3.
In order to maintain control, we recommend that the various weekly programs
are noted in the table at the end of the user instructions.
Switching times are executed in the following order:
– Permanent switching
– 1x switching times. Chapter 7.3.
– Time limited permanent switching. Chapter 8.3 (out priority over ON).
– Date switching times. Chapter 7.3 (out priority over ON).
– Weekly program with priority. Chapter 8.2/8.3 (P9 priority over P1).
– Weekly program. Chapter 7.1/7.2.
– etc.
46