Initial Operation - Siemens 5WG1 372-5EY01 Bedienungsanleitung

5.0 Initial Operation

Ensure that the lithium battery is located (Chapter 4.1)
Press the v button to move the cursor
The cursor moves eacht time a menu item button is pressed.
Cursor below symbol:
Auto (Automatic Program)
– Programmed switching times determine the
switching programm
– Switching override (Manual ON/OFF)
– Random ON/OFF
n
– Set / change date and time
? – Interrogate, change, cancel, completely cancel
Prog – Programming of date, weekly and 1x switching
times
– Programming of date, weekly pulses, 1x pulse,
ON and OFF switching delays
P e.g. public holiday, vacation, or holiday program
s/f
– Programming and change of Summer/Winter time
switching
Ending Programming: use v button, and place cursor
position
.
5.1 Entry Adjustment
The time switches contains a prompt facility. Follow the flashing
symbols. They show the programming sequence.
Entry Adjustment:
What to do when a wrong value has been entered in error?
Cancel the program step again:
– press button CL = one step back
– press button CL repeatedly = repeated steps back
When wrong value flashes:
– enter correct value with buttons 0 .. 9
or when programming channels or week-days:
or in the event of a wrong entry:
– press the same button again
Note:
Only the last entry will be cancelled
36
into following
.