Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Battery Disposal
Run motor until batteries are completely discharged.
1. Loosen the locking nut (2) with a large wrench in
direction of the arrow and completely unthread nut.
2. Remove ratchet head (1) and locking nut (2) from
the tool.
3. Pull and remove aluminium housing (4) from the tool
to expose the two screws.
4. Remove the six housing screws.
5. Remove housing cover.
6. Remove lead wires from switch.
7. Wrap heavy insulating tape around battery terminals or enclose in a
sealable plastic bag to prevent possible shorting.
8. Dispose of batteries through your local waste removal authority.
Maintenance and Cleaning
The unit does not require maintenance and does not contain parts
serviceable by you.
Do not use abrasives, water of any other liquid to clean the unit. Use a
moist cloth at the utmost.
Operation
9
Screw
Werbung
Inhaltsverzeichnis
