Electronics; Electrical Connections - Siemens SIPART PS2 Zusatzbeschreibung

PA-backpanel
PAI_IN, PAI_OUT
PAII_IN
burndy 8p, male
Figure 2-2 Rear view

2.1.1 Electronics

2.1.2 Electrical Connections

SIPART PS2 Zusatzbeschreibung
A5E00245544-03
burndy 19p, female
QRL-module 1
ground-terminal
The 19"-module rack is builded with maximum 3 PA-modules.
In this modules are 5 PROPFIBUS PA basic electronics on a common
filter-and driver board.
The motherboard contains all the electronic elements such as the CPU,
memory, A/D converter. It also contains the display and the operating
keys.
On the filter-and driver board are the connection to the rear and the filter-
and driver components for for the signals from or to the field.
On the rear of the 19"-module rack and the QRL-modules are different
cable connectors:
PA-Bus: 3 wire connectors
PAI IN , PAI OUT und PAII IN
Order No.: Lemo-ERA.2S.303.CLL
Burndy50: 50 pin connector for the connection to the field
Order No.: Burndy 50-F MS 50 RM 58 SGE2
Burndy19: 19 pin connector for the connection to the field
Order No.: Burndy 19-F UTO 0-16-19S-21T
Burndy8: 8 pin connector for the connection from the field to the
control station
Order No.: Burndy 8-M UTO 0-12-8P-21T
Zusatzbeschreibung/ Additional Specification
burndy 50p, female
QRL-module 2
fixing-screw each 4x
filler-panel
QRL-module 3
51