Werbung
Troubleshooting
Poor reception indicates that the battery of the remote control
should be replaced. Observe the polarity when changing the
battery.
If the consumer load, for example a reading lamp cannot be
switched on, check if the device is plugged in or if the illuminant
is defective.
Keep in mind that other wireless applications active on the same
frequency band may cause interference. If possible, switch off
those applications while using the remote control.
Maintenance and Cleaning
If you do not use the remote control for a long period of time,
remove the battery.
Unplug the radio controlled socket before cleaning it.
Do not clean the remote control and the radio controlled sockets
with abrasives or aggressive chemicals in order no to damage
the surfaces. Only clean the units with a lightly moistened cloth.
Make sure that no liquids can enter the interior of the remote
control and the sockets.
Operating
18
Werbung
