Werbung
Notes:
You can allocate more than one socket to one pair of buttons of the
remote control and one socket can be allocated with more than one
pair of buttons of the remote control.
Deleting the Codes
1. Plug the radio controlled socket into a 230 V~ wall socket.
2. Set the socket into the allocating mode by unplugging and re-
plugging. Within 30 seconds press the OFF button connected to
the socket and wait for another 30 seconds. With allocations for
more than one letter the process must be repeated for each letter
individually.
All stored codes/allocations of this particular socket for that but-
ton pair are deleted. Now the socket can be allocated to a new
pair of buttons on the remote.
Using
1. Insert the consumer (electrical household appliance, such as
lamps, TV, CD player, radios etc.) into the radio controlled sock-
ets (2) and switch on the consumer with the device-specific
ON/OFF switch.
2. Insert the radio controlled sockets (3) into 230 V~ wall sockets
3. Press the ON button on the remote that corresponds to the
desired socket (A, B, C or D) in order to switch on the radio con-
trolled socket and the consumer that is connected to it.
4. Press the corresponding OFF button on the remote to switch off
the desired radio controlled socket and the consumer that is
connected to it.
5. Use the ON and OFF buttons (10) to control all radio controlled
sockets simultaneously.
Operating
16
Werbung
