Makita RM350D Betriebsanleitung Seite 26

5. Use the keypad and enter the desired time.
► Fig.53
NOTE: You can enter an alarm duration of 1 to 99 min. The initial
setting value is 10 min.
6.
Press the key to verify the entry.
When the message [Saved successfully.] appears, press the
Changing the PIN code
[Top menu] > [Main menu] > [Security] > [Change PIN code]
This is used to change the currently used PIN code to a new code.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The PIN code entry screen appears.
3. Use the keypad and enter the currently used PIN code.
The sub menu appears.
4. Select [Change PIN code].
The entry screen appears.
5.
Use the keypad and enter the new PIN code.
► Fig.54
6. Enter the new PIN code again for confirmation.
When the message [The PIN code has been changed.] appears,
press the key.
Preventing wire signal interference
[Top menu] > [Main menu] > [Security] > [Change wire signal]
Change a channel for sending wire signals when it interferes with
signals from adjacent work areas.
NOTICE: Dock the Robotic Mower with the charging station
before changing the channel.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The PIN code entry screen appears.
3.
Use the keypad and enter the PIN code.
The sub menu appears.
4. Select [Change wire signal].
The option menu appears.
5. Use the keypad and select a new channel code.
► Fig.55
NOTE: A mark is displayed next to the currently used channel code.
(The initial value is [Channel 1].) When changing the channel,
select a channel without the mark displayed.
6.
Follow the message displayed on the screen and complete the
setting.
When the message [Dock the mower to the charging station.]
appears, select [Confirm] and press the
When the message [Completed.] appears, press the
Protecting the Robotic Mower from theft
[Top menu] > [Main menu] > [Security] > [Anti-theft]
Prevent theft and improper use of the Robotic Mower by setting the
operation lock and notification function.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The PIN code entry screen appears.
3.
Use the keypad and enter the PIN code.
The sub menu appears.
4. Select [Anti-theft].
The option menu appears.
key.
key.
key.
26
5. Use the keypad and place a check mark in the checkbox of the
desired option.
You can select multiple options.
Option Details
Stopped: PIN When the Robotic Mower is forcibly stopped, PIN
code entry is necessary to restart operation.
Stopped: PIN & When the Robotic Mower is forcibly stopped, the
Alarm alarm sounds and PIN code entry is necessary to
restart operation.
Lifted: PIN & When the Robotic Mower is lifted up, the alarm
Alarm sounds and PIN code entry is necessary to restart
operation.
Tilted: PIN & When the Robotic Mower is tilted by a certain
Alarm angle or more, the alarm sounds and PIN code
entry is necessary to restart operation.
6.
Select [Verify] and register the setting.
When the message [Saved successfully.] appears, press the
Other Settings
Saving/loading user preferences
[Top menu] > [Main menu] > [Others] > [Save and load
preferences]
You can save up to three preferred settings you create and customize
in the setting menus and load them at any time. This allows to use a
range of user preferences to switch according to the work area and
environment.
NOTE: A certain range of items (e.g., date and time, PIN code and
so on, set on the initial setting screen) cannot be saved and loaded.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
3. Select [Save and load preferences].
► Fig.56
The menu selection screen appears.
4. Select the desired menu.
Menu Details
Load Loads saved user preferences.
Save Saves the user preferences currently being used.
The option menu appears.
5.
Select the user preference load source or the save destination
option name.
► Fig.57
NOTE: [Listed now] is displayed to the right of options with user
preferences already registered.
6. Follow the message displayed on the screen and complete the
setting.
When the message [Are you sure?] appears, select [Yes] and press
the key.
Changing the date and time settings
[Top menu] > [Main menu] > [Others] > [Date and time]
This is used to adjust or change the date and time set in the Robotic
Mower.
1. Press the button on the control panel.
The [Main menu] appears.
2. Select displayed on the screen.
The sub menu appears.
3. Select [Date and time].
The menu selection screen appears.
ENGLISH
key.