Parkside PLSA 40-Li C2 Originalbetriebsanleitung Seite 37

switch cannot be turned on and
off. Damaged switches must be
replaced at a customer service
workshop. Do not overload your
device. Only work within the
power range indicated. Do not
use low-performance machines
for heavy work. Do not use the
device for purposes for which it
is not intended.
• If you stop the machine for main-
tenance, inspection, storage or
to change accessories, switch
off the power source, discon-
nect the machine from the mains
supply or remove the batteries,
and ensure that all moving parts
have come to a standstill. Al-
low the machine to cool down
before inspection, changing set-
tings etc. Maintain the machine
with care and keep it clean.
• Always allow the machine to
cool down before storage.
• Be aware that the shredding ma-
chine can always still move even
if the power source is switched
off by the locking function of the
protective equipment. Be aware
of this when maintaining the
shredding machine.
• Never try to circumvent the lock-
ing function of the protective
equipment.
Additional safety instructions:
• After they have been joined to-
gether, the blowpipes cannot be
taken apart again!
• Remove the batteries before
installing or removing the collec-
tion bag.
• Do not use any accessories
that are not recommended by
Parkside. This can result in
electric shock or fire.
Additional safety instructions
for batteries
• Do not recharge non-rechargea-
ble batteries.
• Rechargeable batteries have to
be removed from the device be-
fore they are charged.
• Do not use different battery
types or new and used batteries
together.
• Insert the batteries with the cor-
rect polarity.
• Remove dead batteries from
the device and dispose of them
safely.
• If the device is stored for a
longer period of time without
being used, the batteries should
be removed.
Observe the safety
information and notes
on charging and proper use
as shown in the instruction
manual for your battery
and charger from the
(Parkside) X 20 V Team
series. A detailed description
of the charging process and
further information can
be found in the separate
operating instructions.
Recommendation:
• Avoid operating the machine in
poor weather conditions, espe-
cially when there is a lightning
hazard.
GB MT
37