ASROCK K8Upgrade-VM Bedienungsanleitung Seite 13

All manuals and user guides at all-guides.com
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Header
(9-pin USB67)
(see p.2, No. 21)
Shared USB 2.0 Header
(9-pin USB45)
(see p.2, No. 33)
Infrared Module Header
(5-pin IR1)
(see p.2, No. 9)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.2, No. 32)
(AUX1: see p.2, No. 31)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.2, No. 29)
ASRock K8Upgrade-VM800 Motherboard
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
TM
ASRock I/O Plus
6 ready-to-use USB 2.0 ports on
the rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
This USB45 header is shared
with the USB 2.0 ports 4,5 on
ASRock I/O Plus TM . When using
the front panel USB ports by
attaching the front panel USB
cable to this header (USB45), the
USB ports 4,5 on ASRock I/O
Plus TM will not be able to function.
This header supports an
optional wireless transmitting and
receiving infrared module.
These connectors allow you to
CD1
receive stereo audio input from
sound sources such as a CD-
ROM, DVD-ROM, TV tuner card,
AUX1
or MPEG card.
This is an interface for front panel
audio cable that allows conve-
nient connection and control of
audio devices.
provides you
1 3 1 3 1 3 1 3 1 3