Maintenance - Ferm CTM1010 Originalbetriebsanleitung

EN
tube clockwise. The height of the suspension
bracket is adjustable by loosening the black
knob. After adjusting the suspension bracket
to the correct height, retighten the knob.
• Attach the Combitool to the suspension
bracket of the stand; this suspension bracket
can be turned 360°.
Accessories for the Combitool
Ferm does not deliver spare accessories for the
Combitool. The Combitool is designed to use
the standard accessories of Dremel, Black &
Decker, Bosch or Proxxon. Always check that the
maximum rpm of the accessory is suitable for the
maximum speed of the Combitool.
Grinding stones
Fig. 3
When using a grinding stone the first time, use the
dressing stone to balance it. The dressing stone
can also be used for cleaning the surface or to
give the grinding stone a special shape.
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Felt wheels and tip
Fig. 4
The felt wheels or tip should be screwed on the
mandrel.
Material
Steel
Aluminium, brass
Plastic
Sanding bands and disc
Fig. 5
Material
Wood
Steel
Aluminium, brass
Plastic
6
Speed setting
-
+
+ -
-
Speed setting
+
+ -
+
Speed setting
+ +
-
+ -
-
Stainless steel brushes and bristle brush
Fig. 6
Material
Stone, shell
Aluminium, brass
High speed cutter, Diamond wheel point and
Drill
Fig. 7
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Abrasive disc
Fig. 8
Material
Steel
Aluminium, brass
Plastic

5. Maintenance

Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Cleaning
Keep the ventilation slots of the machine clean
to prevent overheating of the engine. Regularly
clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation
slots free from dust and dirt. If the dirt does
not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts. Please clean the tool
immediately after use.
Lubrication
The machine requires no additional lubrication.
Speed setting
+ -
+ -
Speed setting
Max
+ -
+ +
-
Speed setting
+
+ -
-