Eibenstock PLB 500 Originalbetriebsanleitung Seite 12

Technical Characteristics
Diamond Drill Rig PLB 500
Measures:
Length of the column:
Weight:
Max. drilling diameter:
Inclination:
Carriage brake:
Locking in top position:
Fixture of the motor:
Adaptation to surface:
Available special accessories:
Fastening set (concrete)
Fastening set (brickwork)
Spare dowel
Rawl – dowel
Quick action bracing unit
Vakuum plate
Vakuum pump VP 04
Vakuum hose
Diamond drill rig with turnstile, Allen wrench SW 6 and SW 8,
4 Allen screws M 8 x 20 and operating instructions in a cardboard box.
Application for Indented Purpose
The diamond drill rig PLB 500 is made for diamond core drills which are fixed by
means of a mounting plate (e.g. PLD 450 B).
The max. drilling diameter must not exceed 500 mm.
When drilling overhead, a water collecting device must be used.
In case of wrong handling or misuse, the producer does not assume any
liability.
Item
Supply
310 x 300 x 1100 mm (without axle)
860 mm
27,0 kg
500 mm
0° - 45°
yes
yes
quick change motor plate
4 positioning screws / 2 bubble levels
11
Order no.
35721
35724
35722
35725
35730
35857
09204
35855