Multiple Recharging Methods - VigorPool Captain 1200 Bedienungsanleitung

ICON CONTENTS
Input Status
Output Status
Power Display
Anderson Port
AC Input
Fan Run
Wi-Fi
Ports Usage status

3.4 Multiple Recharging Methods

Wall Charging
About 2 Hours
WALL CHARGING:
The CAPTAIN 1200 uses fast charging technology with a maximum input power of 800W; it can be charged up to 80% in 1.5
hours and fully charged in 2 hours. In addition, you can select fast charging 800W, slow charging 400W(silent charging), or
custom charging through the App. Default input power is 800W.
ICON TYPE
Indicates that the CAPTAIN 1200 is charging. There is a display of the remaining
charge time and a display of the current power input.
Indicates that the CAPTAIN 1200 is powering/charging a device. There is a display
of the remaining discharge time and the current power output.
Shows the current battery capacity.
Indicates that the CAPTAIN 1200 is being charged with a solar panel or a car.
Indicates that the wall charger is being used to charge the CAPTAIN 1200.
Indicates that the CAPTAIN 1200 current temperature is too high and needs to
cool down. At this time, there will be some fan rotation sound.
1. Click the IOT button to start the IOT function, and the WIFI icon will be on.
2. Press and hold the IOT button for 3-4 seconds until the WIFI icon disappears and then release,
the WIFI icon will flash, and the device will enter the network configuration state. At this time, use
the VIGORPOOL APP to search for the device, click to connect to the server. If the icon is always
on, that means the WIFI connection is successful, otherwise the icon will flash.
3. Click the IOT button again to turn off the IOT function and the WIFI icon disappears.
Indicates the usage status of each port.
Solar Panels
About 5.5 Hours
Car Charging
About 14 Hours
AC Cable
Electric Generator
About 2 Hours
4