Frequently Asked Questions - VigorPool Captain 1200 Bedienungsanleitung

Icon Indicator
Icons Flash together
Hz
Icons Flash together
Icons Flash and unit
stops charging
Icons Flash and unit
stops charging
Icons Flash and Wireless
Stops Working
Icon Lights Up
Icon Lights Up
If you are still having problems, please feel free to contact us at support@vigorpool.com. For additional information,
check our official website: www.VIGORPOOL.com.

5. Frequently Asked Questions

1. What devices can VIGORPOOL CAPTAIN 1200 power?
A: VIGORPOOL CAPTAIN 1200 can power essential devices less than 1200W (or one device up to 1800W using the inverter
boost feature). The total wattage of devices being powered should be under 1200W unless using the inverter boost feature.
Please refer to your device specification before purchase.
2. What is the VIGORPOOL CAPTAIN 1200 power station lifespan?
A: The VIGORPOOL CAPTAIN 1200 uses lithium iron phosphate battery technology. After 3500 cycles of use, the VIGORPOOL
CAPTAIN 1200 power station's capacity will drop to 80%. Lifespan also depends on how the power station is used, maintained,
etc.
3. Is the VIGORPOOL CAPTAIN 1200 waterproof?
A: The VIGORPOOL captain 1200 is not waterproof, please stay away from water sources.
Problem
DC Output
Overload Protection
or Short Circuit
AC Output
Overload Protection
or Short Circuit
AC Input Over
Current Protection
or Short Circuit
Solar Panel Input
Current Protection
or Short Circuit
Wireless charging
not working
High-Temperature
Protection
Low -Temperature
Protection
Solution
Turn off the DC output and remove the
abnormal load. After 10 seconds, the power
station should function as usual.
Turn off the AC output and remove the
abnormal load. After 10 seconds, the power
station should function as usual.
The abnormal state will be cleared
automatically after 10 seconds. After that,
press the AC input over-current protector
button and unplug the charging cable. Then
the power station should function as usual.
The abnormal state will be cleared automa-
tically after 10seconds. Then the power supply
will be restored.
Remove the abnormal load. After 10
seconds, the wireless function as
usual.
The power supply can be restored automa-
tically after the battery cools down.
The power supply can be restored
automatically after the battery temperature
returns to safe operating temperatures.
Error code
E002
E003
E004
E005
E006
E007
E008
8