KSIX ENERGY LAMP Bedienungsanleitung

ENERGY LAMP
User manual
BXCQILAMP01
Technical information
Input parameters: DC 5V-2A, 9V-1.67A
Wireless output power: 5W/7.5W-10W
Charging efficiency: 70 %
Charging range: 4 - 8 mm
Size: 115 x 115 x 10 mm
Weight: 134 g
Micro USB - USB included
Compatible with Qi wireless charging technology
①
① ON/OFF button
② LED indicator
③ Micro USB input
④ Flexible neck
④
②
③
Using the fast charge wireless charger
Charging a smartphone with fast wireless charging
1. Connect the wireless charger to a power source using the micro USB - USB cable.
The LED indicator will turn on blue for 3 seconds, green for 15 seconds and then it
will enter standby mode. If you wish to use fast charging power, plug the wireless
charger into a power source with a Qualcomm QuickCharge 2.0 charger or higher
(not provided with the product) or into a USB 2A charger or higher for iPhone.
2. To charge a device equipped with wireless charging technology*, place it in the
center of the charger and this will start delivering energy automatically. During the
charge, the LED indicator will flash blue. The battery icon on your mobile phone
will show that it is charging.
*If your device is not equipped with wireless charging technology, the LED
indicator will blink blue and green quickly.
Note: Please keep in mind that the iPhone 8 and higher may overheat during
charging. If your device becomes too hot, it is possible that the software limits
battery charging to 80%. Restart charging with the iPhone and the charger located
in a cooler place.