Power Switch - S-idee 16207 Bedienungsanleitung

Power Switch

1. Turn on the power switch of the transmitter, the signal indicator light of transmitter flashes.
2. Press the power button of high speed car, which is on the side of the ESC; the indicator light of high
speed car flashes.
3. When the indicator light stays on, the high speed car can be operated to play.
● When turn on the transmitter, please DO NOT touch the throttle and steering. After turn on the
!
transmitter's power, please operate after the indicator light of transmitter staying on.
● Please comply the principle of "turn on the transmitter firstly, then turn on the high speed car''.
● In the frequency matching, please make sure there is only one pair of transmitter and high speed
car in matching at the same time, otherwise the frequency will match wrongly.
R30 Receiver
!
Warning: Please make sure the connection is correct.
Fan
(VCC/FAN)
ESC
(CH2)
Steering
servo
(CH1)
-4-
VCC/FAN
VCC/FAN
CH3
CH2
CH1
Antenna
(Please make sure it in
vertical direction)
VCC/FAN: Power Interface (VCC=5-6V)
R30 Indicator
situation
Stays on
Flashes
VCC/FAN
VCC/FAN
CH3
CH2
R30
CH1
Meanings
Signaled
No Signal